Here’s how to do it: Mix some mayonnaise with a small amount of ashes to make a paste. Apply the paste to the alcohol stain using a soft cloth. Rub the paste into the stain gently, going with the wood grain. Let the paste sit on the stain for about 15 minutes. Wipe off the paste with a clean, damp cloth. 6. Use Iron. Another way to remove sealing wax from wood is to use an iron. The heat from the iron will help to loosen the wax so that you can scrape it away. To do this, put a piece of cloth over the wax and then press an iron on top of it. Hold the iron there for a few minutes to heat up the wax. Take the rag and rub it a bit over the stain to wet the wood. Then lay it down directly over the stain and press it a bit so the peroxide soaks into the wood. [2] Make sure you cover the whole stain. If it’s a very large stain, you may need another rag. 3. Leave the cloth over the stain overnight. Saturate a clean cloth in mineral spirits, then use it to wipe off paste wax from your wood furniture. Next, apply more mineral spirits to the waxy surface, then use a fresh cloth or steel wool to scrub off the loosened wax. Finally, rinse the surface using a damp rag. Naphtha and turpentine are good alternatives for mineral spirits. Mix some baking soda with non-gel and non-whitening toothpaste in a clean tray. Rub the mixture on the wet stain using a clean, dry cloth, taking care to apply it to the stain in the same The best way to remove a stain from wood depends on the type of stain and what kind of finish the wood has. If the wood is unfinished, start by cleaning the wood with a mild dish soap and water. If this does not work, you can try using a wood-stain remover; however, these products can be very potent and should be used carefully. Pour a bit of Citristrip into a metal bowl, then brush the Citristrip on THICK onto your piece. Then cover it with some plastic wrap so the stripper stays wet. Leave the stripper on overnight. Put on some gloves, dip your scrubber into mineral spirits and start scrubbing the Citristrip and stain away. 2. Mix up a mild detergent solution in a bowl. Place some warm water in a bowl and add some mild detergent. Use your hands to mix the solution and create soapsuds. [2] 3. Clean the oily area with your solution. Place some of the soapsuds onto the stained area with a clean cloth and rub onto the affected area. Repeat if Needed. Examine the stripped section of wood. If some lacquer remains, repeat the process until it is completely free of the finish. Continue removing the lacquer in this fashion from small sections of the wood until you have stripped the whole item. For the final removal, rub the steel wool in the direction of the wood grain. 2OBs0.

how to remove finish from wood